If you’re still experiencing trouble, the Connector’s cut may need to pull apart even further. Open the arms out and clip the legs onto the base, insert the shaft into the entire valve assembly and press the arms down.
When I attach a hose to it and turn it on if the hose is not flowing (e.
Lubricate any seams, openings, or attachments generously.
Drain all water out of the fixture before applying the heat.
BABOchon.
.
Saw until you get a solid crack, without cutting the spigot.
.
.
Last but not least, it’s time to remove the cartridge to be cleaned or replaced.
First, try spraying some WD-40 or another lubricant on the nozzle and letting it sit for a few minutes.
Don't call the plumber until you try this.
.
Use a product like LimeAway to clean the connection.
Use a flat head screwdriver or pry bar in the crack you have just sawed open to crack the cap in half.
Put pressure on the wrenches only, push one and hold one, don't put pressure on pipe!! Hey, cool diagram you superimposed on my photo.
Last but not least, it’s time to remove the cartridge to be cleaned or replaced.
steven lavimoniere PLUMBING HEATING & AC.
Pull out the cartridge.
When a valve stem strips, the handle may still turn, but it won't open or close the faucet.